Melitta Caffeo SOLO Mode D'emploi page 16

At a glance
Figure A
Drip tray with cup plate and coffee
1 grounds container as well as display
for full drip tray
2 Height-adjustable outlet
3 Coffee quantity regulator
4
Button for single-cup dispensing
5
Button for two-cup dispensing
6 Water reservoir
7 Bean container
8
Button for coffee strength
9 Display
10
ON/OFF button
Right cover (removable, covering the
11 grinding fineness adjustment element,
brewing unit and identification label)
16
BA_Solo_082016.indd 16
Display
The appliance is ready
Illuminated
for operation.
Appliance is heating
Flashing up or coffee is being
dispensed.
Change the Melitta
Illuminated
Claris
Flashing Filter change in process.
Illuminated Fill the water reservoir
Flashing Insert the water reservoir
Empty drip tray and cof-
Illuminated
fee grounds container
Insert the drip tray and
Flashing
coffee grounds container
1 bean: mild
Illuminated 2 beans: normal
3 beans: strong
Fill bean container; flas-
Flashing hing stops after dispen-
sing the next coffee.
Illuminated Clean the appliance
Integrated cleaning pro-
Flashing
gramme is running.
Illuminated Descale the appliance
Integrated descaling
Flashing
programme is running.
There is air in the system.
If necessary, fill the water
Illuminated tank and press the button
for coffee strength
The appliance is vented.
®
water filter
®
.
21.09.2016 07:23:52