Setting Manual Flash And Stroboscopic Flash With The Slave - Canon SPEEDLITE 580EXII Mode D'emploi

Setting Manual Flash and Stroboscopic Flash with the Slave

Manual flash or stroboscopic flash can be set manually with the slave
unit. As with studio flash units, you can set the flash output individually
with the slave units for wireless or manual flash.
Manual Flash
Stroboscopic Flash
46
Hold down the <D> button for 2
sec. or more.
<q> will blink.
Set the manual flash output (p.22).
Hold down the <D> button for
2 sec. or more.
<q> will blink.
Press the <D> button again
and <p> will blink.
Set the stroboscopic flash (p.24).