Wireless Settings; Master Unit Setting; Slave Unit Setting - Canon SPEEDLITE 580EXII Mode D'emploi

Wireless Settings

You can switch between normal flash and wireless flash. For normal
shooting, be sure to set the wireless setting to OFF.

Master Unit Setting

Slave Unit Setting

36
Press the <H> button for 2
1
sec. or longer until the display
blinks as shown on the left.
Set it as the master unit.
2
Turn the <9> dial until <
blinks, then press the <8> button.
M
<
displayed, and the Speedlite is set as
the master unit.
Set it as a slave unit.
Do the "Master Unit Setting"
procedure above. For step 2, turn the
<9> dial until <
then press the <8> button.
x
<
displayed, and the Speedlite is set as
a slave unit.
M
w
> and <
x
w
> and <
>
> will be
> blinks,
> will be