Fully Automatic Flash Shooting - Canon SPEEDLITE 220EX Mode D'emploi

Fully Automatic Flash Shooting

When the camera's shooting mode is set to <U> (Full Auto) or <V>
(Program AE), E-TTL II/E-TTL fully automatic flash photography will be
enabled, making it as easy as normal AE shooting in the <U> or <V>
mode.
If the flash exposure confirmation lamp does not light, move closer to the
subject and take the picture again. With a digital camera, you can also
increase the camera's ISO speed.
Focus the subject.
1
Press the shutter button halfway to
focus.
The shutter speed and aperture will
be displayed in the viewfinder.
Check that the <Q> icon is lit in the
viewfinder.
Take the picture.
2
Right before the shot is taken, a
preflash is fired, then the main flash is
fired.
If a standard flash exposure was
obtained, the flash exposure
confirmation lamp will light for about 2
sec.
9