Using The Lift; Data Communication; Bars - human care 55000 Manuel De L'utilisateur

Using the lift

Human Care offers several different types
of bar in a variety of widths. The bar chosen
should be appropriate for the patient's needs
and the type of sling used. Place the patient
in the prescribed sling according to the sling
instructions and hang the sling in the hooks on
the bar. Check that the sling's lifting straps are
properly anchored in all hooks.

Data communication

HeliQ is able to communicate with a standard
PC (Win 7/Win 8). This communication makes
it possible to obtain statistics and other
information on the lift.
To communicate with the overhead lift you
need the Human Care Data and Service
Application, software that can be downloaded
from the Human Care website, www.
humancaregroup.com.
Connect the lift to your PC with a standard
mini-USB cable. Start the Human Care Data
and Service Application and follow the
instructions. The lift must be switched on
for communication to be possible. The lift is

Bars

Connect the bar to the hook on the lift belt by
threading the hook diagonally from beneath
(see fig)
The lifting height corresponds to the difference
between the highest and lowest position the
lift can reach. This corresponds to the length of
the lift belt. The length of the lift belt is 1680
mm (66.1")
www.humancaregroup.com
deactivated while communication takes place.
The following information can be read from
the lift
• Article number, serial number and
production date
• Max. user weight
• Software version
• Service dates
• Periodic usage statistics
• Error log
Connected computer equipment must fulfil the
requirements of IEC 60950-1 or IEC 60601-1
ENG
ENG
ENG
29