Function Settings; Audio Settings - Pioneer MVH-290BT Mode D'emploi

3
Turn the M.C. dial to select the options, then press to confirm.

FUNCTION settings

The menu items vary according to the source.
Menu Item
BSM
LOCAL
FM: [OFF], [LV1], [LV2], [LV3],
[LV4]
AM: [OFF], [LV1], [LV2]
SEEK
[MAN], [PCH]
PLAY
STOP

AUDIO settings

Menu Item
FADER*1
Description
Store the six strongest stations on the
number buttons (1/ to 6/ )
automatically.
Restrict the tuning station according to the
signal strength.
Assign or buttons to seek the
stations one by one (manual tuning) or
select a station from the preset channels.
Start playback.
Stop playback.
Description
Adjust the front and rear speaker balance.
Menu Item
BALANCE
EQ SETTING
[SUPER BASS], [POWERFUL],
[NATURAL], [VOCAL],
[CUSTOM1], [CUSTOM2],
[FLAT]
Select an equalizer band and
level for further customizing.
Equalizer band: [80HZ],
[250HZ], [800HZ], [2.5KHZ],
[8KHZ]
Equalizer level: [+6] to [–6]
LOUDNESS
[OFF], [LOW], [MID], [HI]
SUB.W*2
[NOR], [REV], [OFF]
SUB.W CTRL*2*3
Cut-off frequency: [50HZ],
[63HZ], [80HZ], [100HZ],
[125HZ], [160HZ], [200HZ]
Output level: [–24] to [+6]
Slope level: [–12], [–24]
BASS BOOST
[0] to [+6]
HPF SETTING
Cut-off frequency: [OFF],
[50HZ], [63HZ], [80HZ],
[100HZ], [125HZ], [160HZ],
[200HZ]
Slope level: [–12], [–24]
Description
Adjust the left and right speaker balance.
Select the equalizer setting.
Compensate for clear sound at low volume.
Select the subwoofer phase.
Only frequencies lower than those in the
selected range are output from the
subwoofer.
Select the bass boost level.
Only frequencies higher than the high-pass
filter (HPF) cutoff are output from the
speakers.
11
En