Nose And Ear Hair Trimmer - Clatronic HSM 3441 NE Mode D'emploi

WARNING: RISK OF INJURIES!
• Do not use the appliance if the shaving head, blade holder or blade are deformed or
damaged!
• Do not remove the shaving head during operation!
• Do not introduce the appliance further into the nostril / auricle than to the narrow tip of
the shaving head.
CAUTION:
• The shaving head and blade are precision-machined and must not to be exposed to
heavy loading, impacts or similar.
• Do not put any sharp objects into the shaving head.
• Protect the appliance from moisture or liquids.
• This appliance is only meant for removing nose and ear hair. Do not use the appliance
for any other purposes.
• Switch off the appliance before cleaning and removing the batteries.

1 Nose and ear hair trimmer

1 Protective cap for the shaving head
GB
(Battery is not included in the scope of delivery)
1. Turn the bottom cover and pull it off.
2. Insert a 1.5 V battery of the type MIGNON AA into the battery com-
partment. The positive pole (+) has to show towards the shaving
head.
3. Close the battery compartment again: Turn the cover onto the
device until it engages with a click. The flattened part of the cover
must be positioned exactly under the flattened part of the device
(see Fig.).
50
Nose and ear hair trimmer
Special instructions for this appliance
Scope of delivery (without fig.)
Inserting of the battery