Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
D6
16-01-2003
16:07
DESCRIPTION OF THE APPLIANCE (pag. 2)
A Filter cap fastening hook
B Anti-odour filter cap
C Lid
D Inspection window (if provided)
Filter inspection opening
E
F
Basket
G Handle slider
H Basket handle
I
Lid opening button
WARNING
SERIOUS HOT-OIL BURNS MAY RESULT
FROM A DEEP FRYER BEING PULLED OFF
A COUNTERTOP. DO NOT ALLOW THE
CORD TO HANG OVER THE EDGE OF
THE COUNTER WHERE IT MAY BE
GRABBED BY CHILDREN OR BECOME
ENTANGLED WITH THE USER. DO NOT
USE EXTENSION CORD.
IF YOUR DEEP FRYER IS SUPPLIED WITH A CORD SET WITH MAGNETIC CONNECTOR:
First fit the magnetic connector to the appliance, as
seen in Figure 13, making sure that the protruding part
of the connector "X" is correctly inserted in the corre-
sponding slot on the appliance, and then plug the
cable into the power outlet.
Warning
Never leave the appliance plugged into the power
outlet if the magnetic connector is not fitted to the deep
fryer, Figure 14.
Pagina 5
X
fig.13
Handle for lifting appliance
L
M Minute timer (if supplied)
N Minute timer key (if supplied)
O Pilot lamp
P Sliding thermostat control/OFF switch
Q Drainage tube panel (if provided)
R Drainage tube "easy clean system"
(if provided)
S Cord holder (if provided)
DO NOT DRAPE
CORD!
KEEP FROM
CHILDREN!
If the magnetic connector does not remain in place,
check that it has been inserted correctly, see Figure 13.
If the problem persists, contact an authorised service
centre.
When the appliance is powered, always leave some
free space around the magnetic connector, so as to
prevent it from becoming detached.
Only use a type TA-35PA cord set supplied by De'lon-
ghi authorised service centres.
fig.14
5
Publicité
Table des Matières
