Chicco AroundU Mode D'emploi page 25

Siège-auto
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
account, enter the name and date of birth of
the child. You can also enter a photograph.
Artsana does not guarantee equipment oper-
ation in conditions other than those indicated
above, or in the case of improper use (including,
but not limited to, use with minors who are
not correctly secured to the car seat, if used
with animals, etc.).
7. ADJUSTING THE HEADREST AND HAR-
NESSES
The height of the headrest and restraint har-
nesses can be simultaneously adjusted to 8
positions by using the headrest adjustment
ring (F).
WARNING! To adjust them correctly, the
headrest must be fitted so as to allow that
the harnesses come out from the backrest at
the height of the child's shoulders (Fig. 24). To
adjust the height, pull the adjustment ring (F)
located above the headrest (Fig. 25) up until
the desired position is reached; now release
the ring and ease the headrest until a click
is heard, indicating that it is locked correctly
into position.
To tension the safety harness of the child car
seat, pull the adjustment strap (E) (Fig. 26) of
the harness, until the harness straps adhere to
the child's body correctly.
WARNING! Do not over-tighten the harnesses
around the child: If you can insert one finger
between the harness and your child's shoul-
ders, it means that it is tightened correctly.
8. ADJUSTING THE INCLINATION OF THE
CHILD CAR SEAT
The child car seat can be reclined to 4 positions.
To adjust the inclination of the child car seat,
pull the reclining lever (J) (Fig. 27).
To make reclining as easy as possible, we rec-
ommend doing so with the child car seat in
an intermediate position.
9. INSTALLING THE SIDE SAFETY SYSTEM
The Side Safety System is a device that is in-
stalled on the door side for utmost protection
in the case of a side impact.
To install it, insert the end in the hole in the
structure, press the central portion and rotate
it (Fig.28).
10. BUILT-IN MIRROR
The car child seat is equipped with a mirror
that allows you to check the position of the
child while driving; it is possible to adjust the
inclination of the mirror by acting on it with a
light pressure (Fig. 29)
11. MAINTENANCE
The cleaning and maintenance of the product
must only be carried out by an adult.
How to clean the fabric cover.
The child car seat's fabric cover can be removed
and cleaned by hand or in a washing machine
at 30°C. Please refer to the care label for instruc-
tions on cleaning the seat fabric.
30° C
30° C
Never use abrasive detergents or solvents. Do
not dry the fabric cover within a dryer, let it dry
without squeezing it.
The fabric cover must only be replaced with
another cover approved by the manufacturer,
since it is an integral part of the child Car seat
and, therefore, one of its safety elements.
WARNING! To ensure the safety of the child
car seat, never use it without its fabric cover.
Now remove the cover following the instruc-
tions below:
Press the restrain harnesses adjustment but-
ton and, at the same time, hold the two har-
nesses of the child car seat, located under the
shoulder straps, and pull in your direction to
loosen them;
Unfasten the safety harness, pressing the red
button on the buckle;
Remove the cover starting from the two hooks
under the seat near the reclining button (Fig. 30);
25
Machine washable at 30°C.
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean

Publicité

Table des Matières
loading

Table des Matières