Tare / Zero; Display Brightness; Hold Function - Gram C4 Série Manuel D'utilisation

Tare / Zero

To obtain the net weight of a product. Place a container and press the
key or B on remote control, the display shows zero value, put the product into
the container, the display will show the net weight of the product.

Display brightness

1. With the crane scale disconnected, press the key
press also the key
2. The display will show: "Dsp X".
3. Available options:
X=0 Low brightness.
X=1 High brightness.
X=2 Automatical brightness (when weight changes, the high
brightness is activated, after 20 seconds of stability, the low
brightness is activated).
4. Press key to select the desired mode.
5. Press the

Hold function

1. Press the key H on remote control, the display´s reading will remain
locked for 30 seconds.
2. Press again the key H on remote control, the Hold function will be turn
off, the balance will return to normal weighing mode.
.
key to return to normal weighing mode.
the same time
7