Operation; Control Panel; High Temperature Alarm - AEG AHB73721LW Notice D'utilisation

6 www.aeg.com

3. OPERATION

3.1 Control panel

High temperature alarm light
1
Power indicator light
2
FROSTMATIC light
3
3.2 Switching on
1. Insert the plug into the wall socket.
2. Turn the Temperature regulator
clockwise to a medium setting.
The power indicator light will light up.
If the temperature inside the
appliance is too high the
Alarm light will blink. Active
the FROSTMATIC function.
3.3 Switching off
Turn the Temperature regulator to the
OFF position.
3.4 Temperature regulation
The temperature within the appliance is
controlled by the Temperature Regulator
situated on the control panel.
To operate the appliance, proceed as
follows:
1 2 3
FROSTMATIC switch and Alarm reset
4
• to obtain the minimum coldness, turn
the Temperature regulator towards
.
• to obtain the maximum coldness, turn
the Temperature regulator towards
.
A medium setting is
generally the most suitable.
However, the exact setting
should be chosen keeping in
mind that the temperature
inside the appliance
depends on:
• room temperature
• how often the lid is
• the quantity of food
• the location of the

3.5 High temperature alarm

An increase in the temperature in the
freezer (for example due to an power
failure) is indicated by:
• switching on of the Alarm light
• sounding of buzzer
During the alarm phase, the buzzer can
be switched off by pressing the Alarm
reset switch.
During the alarm phase, don't place food
inside the freezer.
4
opened
stored
appliance.