Disposal Information; Before Using For The First Time - Bosch BX3 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
en

Disposal information

Packaging
The packaging is designed to protect the
vacuum cleaner from being damaged during
transportation.
It is made of environment-friendly
materials and can be recycled.
Dispose of packaging that is no longer
required at an appropriate recycling point.
Used vacuum cleaner
Used vacuum cleaners still contain many
recyclable materials.
Therefore, please take used vacuum cleaners
to your retailer or recycling centre so that they
can be recycled.
For current disposal methods, please enquire
at your appliance dealership or local council.
Please note
!
Only connect the appliance to a socket that is
protected by at least a 16 amp circuit breaker.
If a circuit breaker should trip when you
switch on the vacuum cleaner, this may be
because other electrical appliances which
have a high current draw are connected to
the same power circuit.
To prevent the circuit breaker from tripping,
select the lowest power setting before
switching the vacuum cleaner on, and
increase the power only once it is running.
Fold out picture pages.

Before using for the first time

1*
Figure
Push the handle onto the flexible hose until it
engages.
2*
Figure
Push the crevice nozzle and upholstery nozzle
back into the accessories holder as illustrated.
Setting up
3
Figure
a) Push the flexible hose into the opening at the
front of the twin cylinders.
b) To remove the flexible hose, turn it to release
the catch and pull the hose out.
4*
Figure
Push the handle into the fixed / telescopic
tube.
To remove it, turn the handle slightly and pull
it off the tube.
5*
Figure
Insert the fixed / telescopic tube into the
adapter of the floor tool.
To remove it, turn the tube slightly and pull it
out of the floor tool.
6*
Figure
a) Connect the fixed tubes together, or
b) Unlock the telescopic tube to adjust its length
by moving the sliding button in the direction
of the arrow.
7
Figure
Holding the power cord by the plug, pull out
the required length and plug it into the mains
socket.
11

Publicité

Table des Matières
loading

Table des Matières