Key Override; Lock Override - Schlage BE365 Mode D'emploi

Key Override

Key Override can be used to gain access when the battery is completely dead, when no valid User Code is
known or when Lock Override is engaged.
1. Insert the key into
the cylinder.
† Reverse steps to relock. Hold the thumbturn still while removing the key. See Changing the Battery on page
6 or Restore Factory Settings on page 15 for more information.

Lock Override

Lock Override can be used to completely disable the keypad. When engaged, a key must be used to unlock
the lock.
1. Remove the inside
cover.
2. Rotate the key 90°
toward the hinges.
2. Disconnect and
remove the battery.
3. Push the key and
cylinder into the
thumbturn.
3. Use a small flathead
screwdriver to rotate
the lock override
slot to LOCKOUT.
Slot
4. Rotate the
thumbturn 90°
toward the hinges.
†
4. Re-tuck wires so
they will not be
crimped. Replace
the cover.
7 7