Programming Guide; Schlage Button Signals; Codes; Default Code Locations - Schlage BE365 Mode D'emploi

PROGRAMMING GUIDE

Schlage Button Signals

The color of the Schlage button indicates the status of the lock.
Orange
• the lock is in programming mode
Green
• a correct user code was entered
• the programming process is complete

Codes

Control of the lock is simply managed via a six-digit Programming Code and four-digit User Codes.
PROGRAMMING CODE
(Six Numbers)
• The lock comes preset with one unique default
Programming Code. It can be found on the
stickers, one on the back of the keypad assembly
and one on the front of this User Guide.
• Used to put the lock in programming mode.
• DOES NOT unlock the lock.
• The first four numbers must be different from all of
the User Codes currently in the lock.
• If you forget the Programming Code, you can reset
the lock to factory settings, which restores the
default Programming Code. See Restore Factory
Settings on page 15.

Default Code Locations

The Default User Codes and Programming Code are located in two places:
Back of the Keypad
»
You must remove the Keypad from the door to see
this sticker.
10
Red
• an incorrect user code was entered
• there was an error in programming
• low batteries
• red blinking indicates critically low battery
USER CODES
(Four Numbers)
• The lock comes preset with two unique default
• Used to unlock the lock.
• These four numbers must be different from the first
• Up to 19 possible User Codes can be stored in the
Front of this User Guide
Programming Code XXXXXX
User Code A XXXX
S/N x-xxxxxxxx
User Code B XXXX Model XXXXX

User Codes. They may be found on the stickers,
one on the back of the keypad assembly and one
on the front of this User Guide.
four numbers of the Programming Code.
lock at one time.
Keypad
Locks
User Guide
BE365
PLEASE KEEP THIS GUIDE CONSERVE ESTA GUÍA
You will need these codes to operate ¡Necesitará estos códigos para operar
your lock! la cerradura!
Programming Code XXXXXX
Place Label Here
User Code A XXXX
S/N x-xxxxxxxx
Poner la etiqueta aquí
User Code B XXXX Model XXXXX
Placer l'autocollant ici

Default Codes
Códigos de predeterminado
Codes du défaut
FE575/FE595
VEUILLEZ CONSERVERCE GUIDE
Vous aurez besoin de ces codes pour
faire fonctionner la serrure!