Accessory Disc Selection And Use - Waring Commercial WFP14S Manuel D'utilisation

Turning the machine off with the PULSE/OFF lever.
• Always switch the food processor off by pressing and releasing the PULSE/OFF lever. This assures
that the power is not supplied to the motor.
• Always switch the food processor off and wait until rotation stops before removing the cover.
• While the safety interlock switch will turn the machine off if the cover is rotated clockwise, or the
cover is removed while running, this should not be the means of ON/OFF operation.
• Before rotating the lid, always make sure the machine is off by pressing the PULSE/OFF lever as a
safety precaution.
The WFP11S and WFP14S food processor disc accessories are made to perform a wide variety of food
processing tasks: slicing, grating and shredding. Three (3) accessory discs are included with both the
WFP11S and WFP14S food processors. As of this printing they are:
For use with WFP11S:
WFP118 - 4 mm, ⁄ " Slicing Disc
5
3 2
WFP115 - 4 mm, ⁄ " Shredding Disc
5
3 2
WFP113 - 2 mm, ⁄ " Grating Disc
5
6 4

Accessory Disc Selection and Use

For use with WFP14S:
WFP146 - 4 mm, ⁄ " Slicing Disc
5
3 2
WFP144 - 4 mm, ⁄ " Shredding Disc
5
3 2
WFP143 - 2 mm, ⁄ " Grating Disc
5
6 4
13