Festool CT 26 E HEPA Notice D'utilisation D'origine page 12

SC-FIS-CT 26/36/48
2
5
Removing the filter bag
► Open the locking clips [2-2] and remove the
top section of the machine [2-1].
► Remove the filter bag (Fig. [6]).
► Dispose of the used bag in accordance with
statutory regulations.
► Clean the dust container [2-3].
► Insert a new filter bag if necessary (see ).
12
1
3
2
6
► Replace the top section [2-1] and close the
locking clips [2-2].
10.2 Changing the disposal bag
Inserting the disposal bag [7]
► Open the locking clips [2-2] and remove the
top section of the machine [2-1].
► Insert a new disposal bag (ENS-CT26/36/48)
on the inlet nozzle of the container and lock
in position.
Important: The lateral openings on the dis­
posal bag must be positioned inside the
container. Make sure that the bolt engages.
► Place the disposal bag over the edge of the
container.
Make sure that the contacts [7-1] are
free.
► Replace the top section [2-1] and close the
locking clips [2-2].
Removing the disposal bag [8]
► Open the locking clips [2-2] and remove the
top section of the machine [2-1].
English
1
3