Troubleshooting; Malfunctions - Bosch MUM 2 Série Notice D'utilisation

Troubleshooting

Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
▶
staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
▶
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.

Malfunctions

Fault
The appliance is not work-
ing.
The swivel arm cannot be
opened or closed because
the tool is jammed in the
bowl.
Cause
The mains plug of the power
cord is not plugged in.
The circuit breaker is faulty.
There has been a power cut.
Drive is not in the parked po-
sition.
Troubleshooting en
troubleshooting
Connect the appliance to the power
▶
supply.
Check the circuit breaker in the
▶
fuse box.
Check whether the lighting in your
▶
kitchen or other appliances are
working.
Set the rotary switch to
1.
When the swivel arm is open, re-
2.
move the tool and close the swivel
arm.
Set the rotary switch to and hold
3.
it in this position.
a The drive slowly moves until the
correct parked position is reached.
⁠ .
37