Attaching Bowl Lid; Removing Bowl Lid; Processing - Bosch MUM 2 Série Notice D'utilisation

en Basic operation

Attaching bowl lid

Requirements
¡ The required tool is used here.
¡ The bowl has been inserted.
¡ The swivel arm is closed.
Press the release button, raise the
1.
swivel arm slightly and hold in
place.
→ Fig.
10
Lift the lid slightly at the front, slide
2.
fully onto the bowl and set down.
→ Fig.
11
The filling shaft must face towards
the front.
Push the swivel arm down until it
3.
engages.
→ Fig.
12

Removing bowl lid

Press the release button, raise the
1.
swivel arm slightly and hold in
place.
Lift the lid slightly at the front and
2.
pull it out towards the front.
Push the swivel arm up until it en-
3.
gages.

Processing

You can find out everything you need
to know about processing food here.
Recommended speeds
Observe the recommended speeds
for optimum results.
Setting Use
1-2 Stir in and mix ingredients.
1-2 Knead heavy dough, e.g. yeast
dough.
3-4 Beat and stir ingredients, e.g.
whipped cream.
34
Processing ingredients with tools
WARNING
Risk of injury!
Rotating drives, tools or accessory
parts may cause injury.
Keep hands, hair, clothing and
▶
utensils away from rotating parts.
Only attach and remove tools and
▶
accessories once the drive has
stopped and you have unplugged
the appliance.
Before changing tools or cleaning
▶
the appliance, switch off and dis-
connect it from the mains.
Only use the tools when the bowl
▶
is inserted, the lid is fitted and the
drive covers are in place.
Switch on the appliance only if all
▶
preparations are complete and the
swivel arm is engaged in the posi-
tion described.
Never open the swivel arm during
▶
processing.
Never leave the appliance
▶
switched on if the power supply is
interrupted. The appliance will
automatically start up again follow-
ing the interruption in the power
supply.
Requirements
¡ The bowl has been inserted.
¡ The required tool is inserted.
Add the ingredients to the bowl.
1.
Press the release button and push
2.
the swivel arm down until it en-
gages.
Insert the mains plug.
3.
Set the rotary switch to the re-
4.
quired speed.
→ Fig.
13
Process the ingredients until you
5.
achieve the required result.
Set the rotary switch to
6.
→ Fig.
14
Wait until the appliance stops.
⁠ .