Installation; Step 1: Select Installation Location For The Sounder; Step 2: Open The Cover Of The Sounder - Abus FUSG50110 Manuel D'installation

Installation

Step 1: Select installation location for the sounder

Select an installation location within the wireless range of the alarm panel (max. 500 m outdoors).
Make sure the external power supply unit has a suitable 230 V power supply.
Before starting installation, identify a suitable installation location for the sounder if
necessary using the wireless test box.
Note
Incorrect or unclean installation work may lead to erroneous interpretation of signals,
the consequences of which may include false alarms. The costs incurred by potential
dispatches of rescue services, such as the fire service or police, must be borne by the
operator of the system.
To ensure trouble-free operation, the sounder must NOT be installed:
• at a distance of less than 1 m from large metal structures such as metal doors
or frames, water tanks, refrigerators or vehicles
• at a distance of less than 1 m from household electrical systems, distributors
or metal pipes
• inside metal housings
• close to the main power supply, or close to water or gas pipelines
• close to high-voltage devices or electronic devices such as computers,
photocopiers or other wireless devices

Step 2: Open the cover of the sounder

• Open the two covers of the two cover fixing screws.
• Remove the two screws and open the cover (Image 2)
Image 2
Installation
41 | E N