Cascade E-SERIE Sideshift Instructions De Montage page 2

C ONTENTS
Recommended Hydraulic Supply
Truck Requirements
Installation
Periodic Maintenance
R ECOMMENDED HYDRAULIC SUPPLY OPTIONS
E-Series Clamps provide the best performance with the
hydraulic supply arrangements shown below. Refer to
Cascade Hose and Cable Reel Selection Guide, Part No.
212119, to select the correct hose reel for the mast and
truck. The hose and fitting requirements are:
• All hoses for clamp and sideshift functions should be at
least No. 6 hose with 9/32 in. (7 mm) minimum I.D.
• All fittings should have a minimum internal diameter of
9/32 in. (7 mm).
A
2
This Manual provides instructions for installing Cascade
E-Series Non-sideshifting and Sideshifting Clamps and
2
Turnafork ™ . Follow the suggested installation procedures
for best results. If you have any questions or need more
information, contact your nearest Cascade Service
Department for assistance (see back cover).
3
Read the WARNING Statements placed throughout this
Manual to emphasize safety during Clamp installation.
IMPORTANT: Field alterations may impair performance or
4
capability and could result in loss of warranty. Consult
Cascade for any required modifications.
10
Non-Sideshifting
A or B
RH or LH THINLINE™ 2-port hose reel group.
OR
C
Mast single internal hose reeving group.
Sideshifting
B
A and B
RH and LH THINLINE
OR
C
C
Mast double internal hose reeving group.
Sideshifting with Solenoid
A
6-N-1 cable/hose reel group.
OR
A and C
Cable reel and single internal hose reeving group.
GA0033.ill
™
2-port cable hose reel groups.