Using Your Refrigerator; Thermostat Setting Button; Defrost - Beko RDSA180K20W Notice D'utilisation

Masquer les pouces Voir aussi pour RDSA180K20W:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
5

Using your refrigerator

Thermostat setting button

The interior temperature of your
refrigerator changes for the
following reasons:
• Seasonal temperatures.
• Frequent opening of the door and
leaving the door open for long
periods.
• Food put into the refrigerator
without cooling down to the room
temperature.
• The location of the refrigerator in
the room (e.g. exposing to
sunlight).
• You may adjust the varying interior
temperature due to such reasons
by using the thermostat. Numbers
around the thermostat button
indicates the cooling degrees.
• If the ambient temperature is higher
than 32°C, turn the thermostat
button to maximum position.
• If the ambient temperature is lower
than 25°C, turn the thermostat
button to minimum position.

Defrost

A) Fridge compartment
Fridge compartment performs full-
automatic defrosting.
Water resulting from the defrosting
passes from the water collection
groove and flows into the
evaporator through the drain pipe
and evaporates here by itself.
• Check regularly to see if the drain
pipe is clogged or not and clear it
with the stick in the hole when
necessary.
B) Freezer compartment
• Deep freezer compartment does not
perform automatic defrosting in
order to prevent decaying of the
frozen food.
• Frost formation in the freezer
compartment must be defrosted
every 6 months. It is recommended
to defrost the ice when the deep
freezer compartment is not filled too
much or is empty.
• To do this, wrap the frozen food by
paper and keep them in the coolest
place possible or in another
refrigerator if available.
11
EN

Publicité

Table des Matières
loading

Table des Matières