Oneida Air Systems XXK070323 Mode D'emploi page 13

Table des Matières

Publicité

Single and Three Phase Wire Diagram
Use wiring diagram on motor plate if different from below.
Wiring should always be done by a licensed electrician!
- Electrically insulate all connections.
- For counter-clockwise rotation, looking from top of motor down.
7.5hp Three Phase
Baldor Motor / 208 - 230/460v / 19 - 17/8.6 amps / TEFC / C Face / 3450 rpm
208 / 230 Volts
1 & 7
L1
2 & 8
L2
3 & 9
L3
4
Tie Together
5
6
To reverse rotation interchange any two line leads.
Check rotation after wiring.
Wire for counter-clockwise rotation.
OAS three phase systems are
wired for 240 volts. Additional
components are needed for
460 volt requirements. See Pg.
17 for details.
460 Volts
1
L1
2
L2
3
L3
Tie Together
7 & 4
Tie Together
8 & 5
Tie Together
9 & 6
12
Motor
Wire
Box
Green
Chassis
Screw
Ground: Connect house ground
wire to green chassis screw in
motor wire housing box.

Publicité

Table des Matières
loading

Table des Matières