Sleep Timer - Seg CR 117DAB+ Manuel D'utilisation

ALARM OPERATION
8 You will now see an alarm icon appear on the
display stating ALARM 1 or 2.
13:44
DAB
14 -- 34
9 To cancel an alarm setting press the ALARM
button, use the T+ / T- buttons to select ALARM 1
or 2 and press the / SELECT button to enter the
options. Here you can use the T+ / T- buttons to
select ON or OFF.
10 Once you have selected the ON/OFF mode
press the / SELECT button to store the setting.
NOTE: When the alarm is set to DAB or FM the
last station listened to will be the station played
during the alarm.
NOTE 2: Should you need to step back to the
previous settings you can press the ALARM
button (12) repeatedly until you reach the setting
required.
Reviewing the Alarm Settings
Follow the below procedure to check the settings
for ALARM 1 & 2.
1 Press the ALARM button (12) the display will
2
show "ALARM 1", press either of the T+ / T-
buttons to cycle between ALARM 1 or 2.
2 After selecting ALARM 1 or 2 press the
/ SELECT button.
3 Continue to press the / SELECT button to
review the settings
4 Should you wish to alter any settings use the T+
/ T- buttons & the / SELECT button to store.
Cancelling the Alarm
To cancel the alarm while sounding press the
ALARM button (12).
SNOOZE OPERATION
1 When the radio or buzzer alarm sounds,
pressing the SNOOZE button (1) will silence the
2 The SNOOZE button can be pressed again
minutes to the snooze period.
NOTE: The snooze button can be pressed every
alarm is switched OFF.

SLEEP TIMER

Your clock radio can be set to turn off after a
preset period of time.
13:44
DAB
SLEEP 50
1 Ensure the unit is on.
2 Press the SNOOZE/SLEEP button (1) to initiate
the snooze setting menu.
8