Seg CR 117DAB+ Manuel D'utilisation page 23

DAB OPERATION
1 The default mode is DAB but should the unit
be in FM mode press and hold the INFO/MENU
2 Use the T+ / T- buttons to cycle through the
menu options until you see TO DAB when
displayed press the / SELECT button to activate.
3 To select a station from the list ( found during
the initial scan pt1 getting started ) use the T+ /
T- buttons to cycle through.
4 When the station you wish to listen to is found,
press the / SELECT button.
5 The display will show TUNING for a second
and then activate the station.
6 Adjust the volume level to the required setting.
NOTE: If no signal is found when activating the
station OFF AIR will appear on the display and
you will need to relocate the radio and perform
another scan (see page 4 for manual tuning).
7 To enter standby mode press and hold the
/ SELECT button. To resume playback press the
/ SELECT button quickly.
DAB OPERATION
Preset Memory
Ten preset stations can be stored in memory for
DAB. To store a station follow the below steps.
1 Press and hold the INFO/MENU button until you
2 Use the T+ / T- buttons to cycle through the
menu options until you see STORE when
displayed press the / SELECT button to activate
the preset store function.
3 P1 on the bottom right
hand side to indicate slot one of ten storage
locations. Select from 1-10 preset locations using
the T+ / T- buttons to cycle through 1-10.
4 Press the / SELECT button to store the current
station on the selected preset location.
13:44
DA B
O LU T E P1
Recalling The Preset Memory
To recall a preset station follow the below steps.
1 Press and hold the INFO/MENU button until you
2 Use the T+ / T- buttons to cycle through the
menu options until you see RECALL when
displayed press the / SELECT button to activate
the preset recall function.
3 P1 on the bottom right
hand side to indicate slot one of ten storage
locations. Select from 1-10 preset locations using
the T+ / T- buttons to cycle through 1-10.
NOTE: You can only recall stations from presets
that have been stored already.
4 Press the / SELECT button to recall the station
from the selected preset location.
Finding New Stations
From time to time new radio stations may become
available. Or you wish to use the unit in a different
location. In this case you will need to perform a
manual scan to update the station list.
3