Secondary Services - Seg CR 117DAB+ Manuel D'utilisation

DAB OPERATION
Program type This describes the "Style" or
"genre" of music that is being broadcast e.g. "Rock
"or "Classical".
Multiplex (Group name) A multiplex/ensemble is
a collection of radio stations that are bundled and
transmitted on one frequency. There are national
and local multiplexes. Local ones contain stations
NOTE: DAB – unlike normal radio, groups
together several radio stations and transmits them
on one frequency.
Date & Day
The time & date is set automatically from the DAB
broadcast or can be set manually.
Channel Frequency Displays frequency and
channel number for the current station.
Bitrate Displays the audio bit rate for the current
station.
Signal Strength Displays the signal strength for
the current station.
NOTE: only station name and DLS will remain on
screen the other options will time out.

Secondary Services

Some radio stations operate a secondary service.
Which means a second temporary broadcast can
be output.
1 If you see a " > " symbol at the end of the station
info / description then a secondary service is
available.
13:44
DAB
BSOLUTE>
2 Press the / SELECT button to activate the
service.
3 You will notice that once tuned to the secondary
service the ">" symbol now appears in front of the
info / description. Press the / SELECT button
again to resume the original broadcast.
FM OPERATION
1 To switch from any mode to FM press and
hold the INFO/MENU button until you see the
2 Use the T+ / T- buttons to cycle through the
menu options until you see " T O FM" when
displayed press the / SELECT button to activate.
3
reset (see page 9), the default frequency will be
87.5
can either press the T+ / T- buttons quickly to scan
up or down the range in 0.05 MHz increments or
press and hold either button for at least a second.
This will scan up or down the frequency range
until a strong signal is found.
4 Any station found will begin to play automatically
and RDS data (if the signal is strong enough will
scroll along the bottom of the display).
5 Adjust the volume level to the required setting.
5