Alarm Operation; Setting The Alarm - Seg CR 117DAB+ Manuel D'utilisation

FM OPERATION
Program type This describes the "Style" or
"genre" of music that is being broadcast e.g. "Rock
"or "Classical".
Date & Day
The time & date is set automatically from the DAB
broadcast or can be set manually.
Signal Strength Displays the signal strength for
the current station.

ALARM OPERATION

Setting the Alarm

The clock radio has two alarm settings.
1 Press the ALARM button (12) the display will
show "ALARM 1", press either of the T+ / T-
buttons to cycle between ALARM 1 or 2.
13:44
DAB
ALARM 1
2 After selecting ALARM 1 or 2 press the
/ SELECT button and immediately afterwards
press either of the T+ / T- buttons to cycle between
ON or OFF for that alarm. Select ON and press
the / SELECT button once more to begin
programming the alarm.
3 First you will need to set the time for the alarm.
Use the T+ / T- buttons to set the hour (24 hour
format), press the / SELECT button to proceed
to setting the minutes using the same process as
above to set the minutes. Press the / SELECT
button to set the On Time and proceed.
13:44
DAB
14 -- 34
4 Press the T+ / T- buttons to cycle through the
alarm repeat options: ONCE, DAILY, WEEKDAYS
& WEEKENDS. Press the / SELECT button to
proceed to the next step.
5 If "ONCE" was selected in the previous step you
will need to complete 2 more stages editing the
Year, Month & Day in the same manner as the
hours & minutes. Once complete press the
/ SELECT button.
6 The next step is to select the alarm type. Use
the T+ / T- buttons to cycle between BUZZER,
DAB or FM. Press the / SELECT button to
proceed.
7 The last setting is the alarm volume setting.
Use the T+ / T- buttons to set the volume and then
press the / SELECT button to save the alarm.
NOTE: Ensure the alarm volume is high enough
that you will hear the alarm.
7