Manual Tuning; Display Modes - Seg CR 117DAB+ Manuel D'utilisation

DAB OPERATION
1 With the radio on and in DAB mode press and
hold the INFO/MENU button until you see the
2 Use the T+ / T- buttons to cycle through the
menu options until you see AUTOSCAN when
displayed press the / SELECT button to activate
the scan function.
3 You will see SCANNING appear on the display
for a second followed by arrows indicating the
scan progress.
13:44
DAB
> > > 3 5
4 Once complete any new stations will be added
to the list and any stations no longer available will
be removed.

Manual Tuning

As well as auto tune, you can manually tune the
receiver. This can help you when aligning the
aerial or when adding stations that were missed
while auto tuning.
1 With the radio on and in DAB mode press and
hold the INFO/MENU button until you see the
2 Use the T+ / T- buttons to cycle through the
menu options until you see MANUAL when
displayed press the / SELECT button to activate
the manual tune function.
3 Use the T+ / T- buttons to select a DAB channel.
Press the / SELECT button to activate the
selected frequency. If a signal is found the display
will show the signal strength of the found channel.
4 Press the / SELECT button once more to
return to the standard DAB tuning mode.

Display Modes

Press the INFO/MENU button, and the bottom
section of the display will show a sub text menu
with various information about the current station.
Every press of the INFO/MENU button changes
the information displayed.
This can be better explained in a diagram showing
the order of sequence. NOTE: once you reach the
last info setting the next press will return you to
Station Name
DLS (scrolling text)
Programme Type
Ensemble Name
Date
Day
Channel Frequency
Bitrate
Signal Strength
Station Name Displays the name of the current
station.
DLS (Dynamic Label Segment)
Dynamic label segment is a scrolling message
that the broadcaster may include with their
transmissions. This message usually includes
information, such as program detail etc.
4