Polarization Instructions - Dyson AM 05 Guide D'utilisation

IMPORTANT SAFETY FEATURES
For your safety this heater is fitted with automatic cut-out switches that operate if the heater tips over or overheats. If the switches
operate, unplug the heater and allow it to cool. Before restarting the heater check and clear any blockages and ensure the heater
is on a solid level surface.
It is normal for the plug to feel warm to the touch; however, if there is a loose fit between the plug and the outlet or the plug
becomes very hot, the outlet may need to be replaced. Check with a qualified electrician to replace the outlet.
READ AND SAVE THESE INSTRUCTIONS
THIS DYSON APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY

POLARIZATION INSTRUCTIONS

This heater has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to
fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this safety feature.
Do not pull on Do not store near
the cord. heat sources.
Do not use near Do not carry by the
open flames. air loop amplifier.
The air loop amplifier
is not a handle.
In order to avoid
overheating and fire
hazard, do not cover
the heater.
3