Use Of Accessories - Disan ZSA 18/1 Manuel D'utilisation

Impianti aspirapolvere centralizzati
Zentralstaubsauganlagen
Central vacuum systems
Système d'aspiration centralisée
DISAN installer. The regulation of this
devices requires always a profession-
al DISAN installer.
In case of any intervention or manipu-
lation or opening of the cleaner, any
guarantee will immediately expire.
5. OPERATION
The cleaner is manufactured in order
to minimize the output of noise both in
the body as in the motor.
During the use please pay attention to
the following advices:
-
Do not allow children to operate the
machine without surveillance
-
Do not allow the suction of the
handle to come into contact the
eyes or ears. Do not insert fingers
in the handle.
-
Pay attention to the ceasing of the
cleaner. Due to the depression in
the tubing and in the motor, the
system remains under depression
for a couple of seconds after swit-
ching it off.
-
Disan take no responsibility for any
harm or damage done due to misu-
se of the machine

5.1 Use of accessories

1) Place the appropri-
ate ends together:
Into the handle;
into the 2 chrome
plated
tubes or into the
chrome plated tele-
scopic pipe.
extension
2) Lift the cover of the
inlet valve and
place the metal
end of the vacuum
hose.
3a) If an automatic inlet
valve is being used
the system will start
when the vacuum
hose is pressed into
the valve.
3b) If using a semi
automatic system,
the machine starts
when the hose end
with the metal col-
lar is placed into
the inlet valve or
when the switch is
operated on the
handle.
4) In the event of
excessive suction
make use of the
pressure regula-
tion on the curved
connection
5) When vacuuming
is finished the
machine can be
switched off
removing the hose
from the inlet valve
and carefully clos-
ing the cover.
by
37