Choose Sound - Philips HTB3525B Manuel D'utilisation

Macintosh OS X Twonky Media (v4.4.2)
1
Visit www.twonkymedia.com to purchase
the software, or download a free 30-day
trial to your Macintosh.
2
Start Twonky Media on the Macintosh.
3
In the Twonky Media Server screen, select
Basic Setup and First Steps.
» The First steps screen is displayed.
4
Type a name for your media server, and
then click Save changes.
5
Back in the Twonky Media screen, select
Basic Setup and Sharing.
» The Sharing screen is displayed.
6
Browse and select folders to share, and
then select Save Changes.
» Your Macintosh rescans the folders
automatically so that they are ready to
share.
Play files from your PC
Note
•
Before you play multimedia content from the computer,
make sure that the SoundStage is connected to the
home network, and the media server software is
properly set up.
1
Press .
2
Select [browse PC], and then press OK.
» A content browser is displayed.
3
Select a device on the network.
» The folders in the selected device are
displayed. Depending on the media
server, the folder names may vary.
• If you cannot see the folders, check
that you have enabled media sharing
on the selected device so that the
content is available for sharing.
4
Select a file, and then press OK.
• Some media files may not play
due to compatibility issues. Check
HTB3525B_F7_UM_V1.0.indb 23
the file formats supported by your
SoundStage.
5
Press the play buttons to control play (see
'Play buttons' on page 14).

Choose sound

This section helps you choose the ideal sound
for your video or music.
1
Press .
2
Press the Navigation buttons (left/right) to
access the sound options on the display.
Sound Description
options
[Surround] Select surround sound or stereo
sound.
[Sound]
Select a sound mode.
[Audio Delay the audio to match the
sync] video.
[Auto
Reduce sudden changes in
volume]
volume, for example, during TV
commercials.
3
Select an option, and then press OK.
4
Press to exit.
• If you do not press a button within a
minute, the menu exits automatically.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
Press .
2
Select [Surround], and then press OK.
3
Press the Navigation buttons (up/down)
to select a setting from your display:
[Auto]: Surround sound based on the
•
audio stream.
[Virtual Surround]: Virtual surround.
•
[Stereo]: 2-channel stereo sound. Ideal
•
for listening to music.
4
Press OK to confirm.
EN
23
12/10/2013 6:04:00 PM