Philips HTB3525B Manuel D'utilisation page 17

2
Press the Navigation buttons (left/right) to
select [Audio sync], and then press OK.
3
Press the Navigation buttons (up/down)
to synchronize the audio with the video.
4
Press OK to confirm.
Play Blu-ray 3D disc
Your SoundStage can play Blu-ray 3D video.
Read the 3D health warning before playing a
3D disc.
What you need
• A 3D TV
• A pair of 3D glasses that are compatible
with your 3D TV
• A 3D Blu-ray video
• A high speed HDMI cable
1
Using the high speed HDMI cable, connect
your SoundStage to a 3D compatible TV.
2
Make sure that the 3D video setting is
enabled. Press , select [Setup] > [Video]
> [Watch 3D video] > [Auto].
• To play 3D discs in 2D mode, select
[Off].
3
Play a Blu-ray 3D disc and put on the 3D
glasses.
• During video search and in certain play
modes, the video is displayed in 2D.
The video display returns to 3D when
you resume play.
Note
•
To avoid flickering, change the brightness of the display.
Bonus View on Blu-ray
On Blu-ray discs that support the Bonus View,
enjoy extra content such as commentaries in a
small screen window. Bonus View is also known
as picture-in-picture.
1
Enable Bonus View in the Blu-ray disc
menu.
HTB3525B_F7_UM_V1.0.indb 15
2
While you play the movie, press
» The options menu is displayed.
3
Select [PIP selection] > [PIP].
• Depending on the video, PIP menu [1]
or [2] is displayed.
To disable Bonus View, select [Off].
•
4
Select [2nd audio language] or [2nd
Subtitle Language].
5
Select the language, and then press OK.
BD-Live on Blu-ray
Access additional features on the Blu-ray discs
with BD-Live content, such as internet chats
with the director, the latest movie trailers,
games, wallpaper, and ringtones.
BD-Live services and content vary from disc to
disc.
What you need
• Blu-ray disc with BD-Live content
• a USB storage device, with at least 1 GB of
memory
1
Connect your SoundStage to a home
network with Internet access.
2
Connect a USB storage device to the
connector at the right side of your
SoundStage for BD-Live download.
3
and select [Setup] > [Advanced]
Press
> [BD-Live security] > [Off].
To disable BD-Live, select [On].
•
4
Select the BD-Live icon in the disc menu,
and then press OK.
» BD-Live starts to load. The loading
time depends on the disc and your
internet connection.
5
Press the Navigation buttons to navigate
BD-Live, and then press OK to select an
option.
Note
•
To clear the memory on the storage device, press
select [Setup] > [Advanced] > [Clear memory].
.
,
EN
15
12/10/2013 6:03:59 PM