Parental Control Settings; Display Settings; Energy Saving Settings; Speaker Settings - Philips HTB3525B Manuel D'utilisation

Masquer les pouces Voir aussi pour HTB3525B:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

[Night mode]: For quiet listening,
decrease the volume of loud sounds
on your SoundStage. Night mode is
only available in DVDs and Blu-ray
discs with Dolby Digital, Dolby Digital
Plus, and Dolby True HD soundtracks.
[HDMI Audio]: Set the HDMI audio
output from your TV, or disable HDMI
audio output from the TV.
[Default sound settings]: Restore
the equalizer settings of all the sound
modes to the default values.

Parental control settings

1
Press .
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Change Password]: Set or change
your password for parental control
access. If you do not have a password
or have forgotten your password, enter
0000.
[Parental control]: Restrict access
to discs that are recorded with age
ratings. To play all discs, irrespective of
the ratings, select 8 or [Off].

Display settings

1
Press .
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Auto subtitle shift]: Enable or disable
automatic repositioning of subtitles on
TVs that support this feature.
[Display panel]: Set a brightness level
(100%, 70% or 40%) on the display
EN
26
HTB3525B_F7_UM_V1.0.indb 26
panel of the SoundStage. If you select
[Auto off], after 10 seconds of button
inactivity, the display will automatically
switch off.
[VCD PBC]: Enable or disable the
content menu navigation of VCD and
SVCD discs with Play Back Control
feature.

Energy saving settings

1
Press .
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Screen saver]: Switch the SoundStage
to screen saver mode after 10 minutes
of inactivity.
[Auto standby]: Switch the SoundStage
to standby after 30 minutes of
inactivity. This timer works only when a
disc or USB play is paused or stopped.
[Sleep timer]: Set the duration of the
sleep timer so that the SoundStage is
switched to standby after the specified
period.

Speaker settings

1
Press .
2
Select [Setup], and then press OK.
3
Select [Advanced], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Enhanced audio]: Select [On] to
enable audio post processing at the
speaker and enable karaoke settings
(if your product supports Karaoke).
To play the original audio of the disc,
select [Off].
12/10/2013 6:04:01 PM

Publicité

Table des Matières
loading

Table des Matières