Bluetooth Playback - Scansonic I101BT Guide D'utilisation

• Choose the media files that you wish to play.
You can set the mode of playback under Configuration >
Playback setup�
My Playlist
You can make your own playlist for the UPnP music files. Choose
and highlight the song you want to add to playlist, press and hold
the [OK] button on remote, until the sign







appears� The song will
be added to My playlist�
Clear My Playlist
Remove all songs in "My Playlist" to allow a new playlist to be
prepared�
Note - If you have DLNA compatible servers available, follow
the steps described above to browse the audio files from DLNA
compatible device on the Tuner to play.

6. BLUETOOTH PLAYBACK

Before transmission between your Bluetooth device and the
radio is possible, both devices must be coupled� This process
is called "pairing"� The Tuner is served as a receiver, to receive
music stream to play on the Tuner� If you have already coupled
to a Bluetooth device before, this connection will be restored
automatically when both devices are in range and Bluetooth
operation has been selected on the radio� "Pairing" does not have
to be repeated� This function may need to be activated in your
Bluetooth device, however�
• Push the [
different operating modes�
] button to display the selection menu for the
I101 BT
13