Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation Step 1.A
Plug the TKP100 and connect locally to it with WiFi (WLAN) network :
Connect to the TKP100 using the local router
LAN
TKP100
• Connect the controller to the customer's WiFi
router with the provided LAN cable.
• Activate the WiFi of your mobile device and register
it to the local WiFi network of your customer.
Note : To ensure the highest level of security, this
initial connection to the TKP100 has to be performed
locally (on installation site) and cannot be performed
from a remote location.
12
12
Router
Connect to the TKP100 using the optionnal
TKH180 WiFi/WLAN extension
or
• Alternatively, the optional TKH180 can conveniently
create a private "confi guration hotspot" for you, useful
to easily install the entire system without the need to
access you customer's WiFi router. Network name :
coviva - XXXXXXXXXXXX, (XXXXXXXXXXXX being
the coviva ID). No password is needed).
• Nevertheless, to enable proper activation after instal-
lation and correct remote control and functionnality
in runtime, the controller must be permanently
connected to internet using the LAN connection.
LAN
Publicité
Table des Matières
