General Precautions - ATI BB02005X Manuel D'utilisation

UK – pag. 1/4
The range of water heaters BB20 ... includes 12 different models available with the following features to meet every need of
installation and use
a) 1 storage capacity (20 liters, 5.3 gallons)
b) 3 powers (500 W - 800 W - 1200 W)
c) 2 power supplies (120 V - 230 V)
d) 2 different types of tanks: stainless steel or enameled

1. GENERAL PRECAUTIONS

• This book is an integral and essential part of the appliance and it has to be kept with care near it for any further
consultation.
• The water heater is conceived for the production of hot water: any other use of it has to be considered dangerous and
unsuitable.
• The appliance has not to be installed in damp rooms, baths, sinks, showers, swimming pools etc. and it has to be
protected from water sprinklings and sprays or from other liquids, in order to avoid short circuits of the electric devices.
• The installation has to be carried out by a qualified person, who is responsible for the application of current safety
regulations. An improper installation, caused by the non-observance of the manufacturer's instructions, can cause
damages to persons, animals or damns to other appliances for which the manufacturer refuses every responsibility.
• Before connecting the water heater, make sure that the electric characteristics printed on the data badge correspond to
those of the electrical supply network.
• If the water heater is installed in a bath, in a damp room or in proximity of water, take care of the safety distances foreseen
by the rule CEI-CEE. Furthermore, interrupters, or any other electric command, have not to be attainable by anybody
having a shower or using the tub. Do not touch the appliance with wet or damp hands.
• Do not allow the use by children or incapable persons without any control.
• The parts of packing (plastic bags, polystyrene, clip, etc.) can be harmful to children and should be carefully disposed of
immediately.
• Read carefully the instructions and advice concerning safety, installation, use and maintenance contained in this booklet.
• If the appliance must be sold or moved to another owner, make sure that the present book stays with the appliance so the
new owner and/or installer can consult it.
• To avoid damages caused by low temperatures, if the appliance is left unused for a long period in a non-heated room, it is
recommended to empty the tank completely. The producer is not responsible for faults, breakdowns or water leakage from
the plant that might be caused by low temperature.
• To get the best performances from the appliance and also for purposes of guarantee, respect rigorously the instructions
given here below.
2. TECHNICAL
BB02005X
tank
exchanger
maximum pressure
empty weight
BT2005
tank
exchanger
maximum pressure
empty weight
Electric supply
power
dimensions
capacity
3. PACKING
The device is packaged and delivered in a cardboard box with adequate protection. In addition to the device, inside the box
there are:
a) Installation Manual
b) the fixing brackets and kits with the fastening screws
c) The safety/check valve
4. DIMENSIONS (see FIG_4-1)
mm (inch ") 420 (16,4) 457 (17,8)
BB02008X
BT2008
230 V ~
2,4 A 3,7 A
550 w 850 w
485 x 420 x 190 mm - 19.1 x 16.5 x 7.5 inch "
A B
BB02012X BB020051X
stainless steel AISI 316 L
stainless steel AISI 316 L
700 kPa - 102 psi
8,5 kg - 19 lb
BT2012 BT20051
enamelled steel
enamelled steel
700 kPa - 102 psi
13,0 kg - 28 lb
5,4 A 4.2 A
1.250 w 500 w
20 l - 5.3 gal
C D
488 (19,0) 190 (7,4) 420 (16,4)
210-0301_libretto_BB20_2018-01_testo_UK.docx
BB020081X BB020121X
BT20081 BT20121
120 V ~
6,7 A 10.0 A
800 w 1200 w
E
485 (18,9)
F