Panasonic EY46A5 Instructions D'utilisation page 9

Outil multi-fonction sans fil
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
7) Do not run the power tool while
carrying it at your side.
Accidental contact with the spinning
accessory could snag your clothing,
pulling the accessory into your body.
8) Do not operate the power tool near
fl ammable materials.
Sparks could ignite these materials.
9) Do not use accessories that require
liquid coolants.
Using water or other liquid coolants
may result in electrocution or shock.
WARNING for charger and battery
pack
• Do not use other than the Panasonic
battery packs that are designed for
use with this unit.
• Panasonic is not responsible for any
damage or accident caused by the
use of the recycled battery pack and
the counterfeit battery pack.
• Do not dispose of the battery pack in
a fi re, or expose it to excessive heat.
• Do not drive the likes of nails into the
battery pack, subject it to shocks,
dismantle it, or attempt to modify it.
• Do not allow metal objects to touch
the battery pack terminals.
• Do not carry or store the battery pack
in the same container as nails or
similar metal objects.
• Do not charge the battery pack in a
high-temperature location, such as
next to a fi re or in direct sunlight.
Otherwise, the battery may overheat,
catch fi re, or explode.
• Never use other than the dedicated
charger to charge the battery pack.
Otherwise, the battery may leak,
overheat, or explode.
• After removing the battery pack from
this product or the charger, always
reattach the pack cover. Otherwise,
the battery contacts could be shorted,
leading to a risk of fi re.
• When the battery pack has
deteriorated, replace it with a new
one.
Continued use of a damaged battery
pack may result in heat generation,
ignition or battery rupture.
• If you detect any abnormalities,
discontinue use immediately and
contact the retailer from which you
purchased this product.
• Do not use the Li-ion battery pack
with its temperature below 0 °C or
above 40 °C.
It may lead to the cause of
malfunction of main unit. Leave the
battery pack at room temperature for
more than one hour for adjusting its
temperature.
• Do not store the tool and battery pack
in locations where the temperature
may reach or exceed 50 °C (such as
a metal tool shed, or a car in the
summer), which can lead to
deterioration of the storage battery.
- 9 -
EN
DE
FR
IT
NL
ES
DA
SV
NO
FI
TR
PL
CS
HU

Publicité

Table des Matières
loading

Table des Matières