Technical Data - ALLTRONIC SEMIS Série Manuel D'installation

UPS models
INPUT STAGE
Nominal voltage
Nominal frequency
(1)
Maximum input current
Nominal battery current delivery
Input voltage tolerance accepted for no
battery intervention (referred to 400V AC)
Input frequency tolerance accepted for
no battery intervention (referred to
50/60Hz)
Input current harmonic distortion
Input power factor
Power Walk In mode
OUTPUT STAGE
(4)
Nominal Voltage
(5)
Nominal frequency
Output nominal current
Apparent nominal output power
Active nominal output power
Output power factor
Short circuit current
Output voltage precision (referred to
output voltage 400V AC)
(6)
Static stability
Dynamic stability
Output voltage harmonic distortion with
linear load and normalized distortion
Admissible crest factor with distorted load
Frequency accuracy in free running
mode
Inverter overload
(Vin>364VAC )
Bypass Overload
BATTERY CHARGE STAGE
Nominal voltage
Maximum recharging current

TECHNICAL DATA

(2)
(8)
SEMIS 160
380-400-415 Vac Three-phase with neutral (4 wire)
50-60Hz
316A
360A
± 20% @ 100% load
-40% +20% @50% load
40-72Hz
THDi = 2.5%
Programmable from 1 to 125 sec. at steps of 1 sec
380/400/415 V AC three-phase with neutral (4 wire)
50/60Hz
232A
160kVA
160kW
Up to 2.7 x In
± 3% resistive load
≤ 0.5% with linear load
≤ 3% with distorted load
103% infinite, 110% 60 min, 125% 10 min, 150% 1min
110% Infinite,125% 60 minutes, 150% 10 minutes
±240VDC
25A (50A optional)
- 105 -
SEMIS 200
383A
450A
± 20%
(3)
≥ 0.99
290A
200kVA
200kW
1
± 1%
± 0.5%
(7)
3:1
0.01%