Status / Alarm Codes - ALLTRONIC SEMIS Série Manuel D'installation

S /
TATUS ALARM CODES
STATUS
CODE
S01
S02
S03
S04
S05
S06
S07
S08
S09
S10
S11
S12
S13
COMMAND
CODE
C01
C02
C03
C04
C05
C06
C08
WARNING
CODE
W01
W02
W03
W04
W05
W07
W08
DESCRIPTION
Pre-loading in progress
Load not powered (stand-by status)
Start-up phase
Load powered by bypass line
Load powered by inverter
Battery operation
Waiting for battery charging
Economy mode on
Ready for start-up
UPS locked – load not powered
UPS locked – load on bypass
BOOST stage or battery charger locked – load not powered
Frequency converter - load powered by inverter
DESCRIPTION
Remote power-off command
Remote load command on bypass
Remote power-on command
Battery test in progress
Manual bypass command
Emergency power-off command
Load command on bypass
DESCRIPTION
Low battery warning
Programmed shutdown on
Programmed shutdown imminent
Bypass disabled
Synchronization disabled (UPS in Free running)
The UPS's maintenance interval has expired
The batteries' maintenance interval has expired
- 101 -