Rack Kit Contents
The two-post rack kit includes (see Figure 1-9):
•
One pair of mounting rails
•
12-24 x 0.5-inch pan-head Phillips screws (8)
•
Releasable tie wraps (2) (not shown in Figure 1-9)
Figure 1-9. Two-Post Rack Kit Components
mounting rails (2)
Installation Tasks
Installing a two-post rack kit includes performing the following tasks in order:
1
Marking the rack
•
Universal-hole spacing rack
•
Wide-hole spacing rack
1-16
Rack Installation Guide
12-24 x 0.5-inch
pan-head Phillips
screws (8)
15.24-cm (6-inch) wide, flush-mount, threaded studs
7.62-cm (3-inch) wide, flush-mount, threaded studs
flush-mount mounting flange
7.62-cm (3-inch) wide, center-
mount, threaded studs
adjustable mounting flange
center-mount mounting flange
15.24-cm (6-inch) wide,
center-mount, threaded
studs