Hamilton Beach Commercial SmartServe Manuel D'utilisation page 6

Installation
Downloading a Custom Cycle
Your SmartServe™ will need to be customized
to adjust for different cup sizes and to control
several different blending, mixing, and water
rinse parameters. If your model has already
been customized for your cups and menu,
please skip this step. For a copy of your custom
cycle, contact Technical Services. Follow these
instructions to download this program via
SmartServe™'s USB port (4).
NOTE: Your flash drive containing the
customized programs may be included in the
packaging or will be sent separately, depending
on your model. To change your program or
create a new one, contact your salesperson.
Insert flash drive containing only the
1.
customized program into the USB port (4).
Turn power switch (3) to the ON (I) position.
2.
Follow instructions on display, to allow file to
3.
download completely.
Turn power switch (3) to the OFF (O) position.
4.
Remove flash drive.
5.
Turn power switch (3) to the ON (I) position
6.
and follow the on-screen instructions.
6
840225900 v12.indd 6
(cont.)
If your SmartServe™ needs to be reprogrammed
to adjust for your menu and cup sizes, contact
your sales representative for assistance.
4/22/15 3:48 PM