Panasonic EY47A1 Instructions D'utilisation page 19

Scie sabre sans fil
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 40
• Charging will not start if the battery
pack is hot (for example,
immediately after heavy-duty
operation).
The orange standby lamp will be
flashing until the battery cools
down.
Charging will then begin
automatically.
4. The charge lamp (green) will flash
slowly once the battery is
approximately 80% charged.
5. When charging is completed, the
charging lamp in green color will turn
off.
6. If the temperature of the battery pack
is 0°C (32°F) or less, charging takes
longer to fully charge the battery pack
than the standard charging time.
Even when the battery is fully
charged, it will have approximately
50% of the power of a fully charged
battery at normal operating
temperature.
7. Consult an authorized dealer if the
charging lamp (green) does not turn
off.
8. If a fully charged battery pack is
inserted into the charger again, the
charging lamp lights up. After several
minutes, the charging lamp in green
color will turn off.
9. Remove the battery pack while the
battery pack release button is held
up. [Fig. 13
]
– 19 –
EN

Publicité

Table des Matières
loading

Table des Matières