Thermor R4GHD-T2S Notice D'installation Et D'utilisation page 18

What you want to do
Choose the set temperature
for ECO mode.
Note :
- The Eco temperature may not be greater than the Comfort temperature.
- The suggested Eco temperature is Comfort -3.5°C. It may be accessed directly by pushing the
key.
5.1.3 - Using Freeze Protection Mode
What you want to do
Choose Freeze
Protection Mode
Nota : The Freeze Protection temperature is pre-set at ~ 7°C and may not be changed
5.1.4 - Using the PROG Mode
What you want to do
Choose the PROG mode
N.B.: For more information regarding scheduling, consult part 6 - Programming
6 – Programming
6.1 - Equilibrium Function
To immediately set the recommended settings use the Equilibrium function. It represents a balance between
your comfort and savings.
What you want to do
Activate the Equilibrium
function
6.2 - Ventilation Functions
To prevent wasting energy the device must be correctly setup when ventilating rooms. Your device has a direct
access button to facilitate this procedure.
What you want to do
Activate the Ventilation
function
Deactivate the Ventilation
function
What you need to do so
Press the and
Stop on the desired temperature and
validate with the
?
What you need to do so
Press the and keys.
Stop at Freeze Protection
validate with .
What you need to do so
Press the and keys.
Stop under the PROG mode and
validate with .
What you need to do so
Press the key.
What you need to do so
Before opening the window, press the
key.
Close the window, press the
key.
What will happen
The temperature moves in increments
keys.
of 0.5°C and flashes.
The temperature chosen is displayed.
key.
What will happen
The cursor
modes and flashes.
?
Only the Freeze Protection
and
mode remains displayed with the
temperature set at 7°C.
What will happen
The cursor
modes and flashes.
PROG mode remains displayed as
well as the mode set by the schedule
and the relevant temperature.
What will happen
«Equilibrium» is displayed for a few
seconds on the screen.
What will happen
The
the screen as well as the Freeze
Protection mode.
The
The current mode and the chosen
temperature are displayed
+
moves under the
?
moves under the
icon is displayed on
icon disappears.