Rami COMPACT II Manuel Utilisateur page 56

REAR PANEL: ANTENNA / AUX RETURN / HYBRID
(A)
Left EXT PGM on XLR female connector.
Nominal level to + 6dBu.
(B)
Right EXT PGM on XLR female connector.
Nominal level to + 6dBu.
(C)
Left ANTENNA output on XLR male connector.
Nominal level to + 6dBu.
(D)
Right ANTENNA output on XLR male connector.
Nominal level to + 6dBu.
(E)
Out AUX 1 / AUX 2 (Stereo and balanced) on female socket DB 15 points.
Nominal level to + 6dBu.
(See schematic).
(F)
AUX RETURN on female socket DB 9 points.
Inputs are stereo and balanced.
Nominal level to + 6dBu.
Internal / External remote :
This function allows you to switch internal program to external program by an external dry loop.
(pin 2 and 8).
Control relay of state of internal or external program.
External program : loop between 9 and 5.
Internal program: loop between 9 and 4.
(See schematic).
(G)
Input / Output for external hybrid on female socket DB 15 points.
Input / output are balanced. Nominal level to + 6dBu.
Remote for hybrid . Remote switch and return for light indicator.
Wire connection is study to connect directly an hybrid TEL 300.
(H)
Power supply male connector Sub-D 9 points.
Never use other power supply.
1 : Earth
2 : Earth
3 : +15V
4 : +15V
5 : -15V
6 : GND
7 : GND
8 : GND
9 : -15V
RAmi
19
COMPACT II