Rami COMPACT II Manuel Utilisateur page 52

REAR PANEL: LINE 1 / LINE 2 CHANNEL (6 to 10)
(A)
Left connector of unbalanced line 2.
The nominal level is between -14dBu and +12dBu.
(B)
Right connector of unbalanced line 2.
The nominal level is between -14dBu and +12dBu.
(C)
Left line input on XLR female connector
The input is electronically balanced.
(Ground in 1, Hot point in 2, Cold point in 3).
The nominal level is between -14dBu and +12dBu.
(D)
Right line input on XLR female connector.
The input is electronically balanced.
(Ground in 1, Hot point in 2, Cold point in 3).
The nominal level is between -14dBu and +12dBu.
(E)
Female DB15 for remote control in / out.
Start / stop remote out is made with opto isolators.
Start / stop remote out is enable only in line 1 position .
All input / output points are fitted with T filters, to protect audio circuits against electrostatic discharges and high
frequency interferences.
Attention : For a good electromagnetic compatibility the point 1 of the XLR is directly connected to steel frame.
RAmi
15
COMPACT II