DINAMIC 1.1
EN
Introduce the drainage pipe in the drainage
12
valve and secure to the vehicle plating along
with the piping and cabling, using the supports,
adhesive and plastic flanges. Caution: clean
the surface of the plating before attaching
the supports.
Connect the power cable terminal to the unit
13
terminal and secure to the original stud using a
3/8 nylon clamp and M6 nut.
Caution: clean the surface of the plating
before attaching the supports.
Connect condenser fan screw terminals of the
14
protective housing with condensing unit screw
terminals.
13
36
12
13
®
12
14