dirna Bergstrom Bycool DINAMIC 1.1 Instructions De Montage page 23

DINAMIC 1.1
CARRY OUT THIS PROCEDURE WHEN THE FOLLOWING CONDITION IS MET.
• Conditions:
- If the vehicle has an alarm
- Place the alarm in service mode.
Remove the key from the ignition switch (1).
1
Press the emergency lights button (2).
2
Keep the emergency lights button pressed
3
down (3).
• Conditions:
- Keep the button pressed down for at least 5
seconds.
Technical details.
If the process finished successfully: the access
lighting and interior light are off when opening
the door.
Wait for at least 30 seconds (4).
4
Remove the wire from the negative terminal
5
(5).
23
EN
®