Charging The Battery - Nilfisk Handy 2-in-1 Instructions D'utilisation

4 Charging the Battery

Make sure to charge the battery in the following situations:
• When using the product for the fi rst time after purchase
• When the suction power reaches an insuffi cient level
• When the product has been stored for a prolonged period (more than a month)
81942401_UM_HANDY_2-in-1.indb 7 81942401_UM_HANDY_2-in-1.indb 7
1
3
1. Connect the adapter to the
2
charging stand
2. Insert the vacuum unit in the
stick body.
Always switch OFF the stick
on the On/Off button when
inserting the hand-held unit in
the stick body.
Avoid any substances be-
tween the contacts of single
unit and stick body.
3. Place the Nilfi sk Handy 2-in-1
in the charging stand.
If the Nilfi sk Handy 2-in-1 is
4
not placed properly in the
battery stand, it will not be
charged or it may fall over.
Avoid any unstable surfaces
when charging, otherwise the
battery will not be charged
due to the insecure contact.
Select a stable fl oor for the
charging stand.
Be careful not to trip over the
power cable when charging
the battery.
4. Connect the power plug to
the power outlet.
When the power plug of the
battery charger is connected
to the AC power outlet, the
indication light will light up.
Note: The indication light will
always be lit when the power is
connected. The main body may
become warm during charging.
This is not an abnormal sign.
7
18-01-2010 14:04:59 18-01-2010 14:04:59