dirna Bergstrom bycool green line COMPACT 1.4 Instructions De Montage page 29

COMPACT 1.4
1- Lead equipment power cable up to the vehicle´s battery, gluing plastic supports on rear cabin side and
fastening it with flanges. Once cabin has been folded, lead cable along lower cabin side, fastening
it with clamps and M4 screws and up to battery with flanges. It must follow the same passage as
original cable (thoroughly clean the area before gluing plastic supports). When connecting equipment
to battery, it will carry out a test of all its leds, 88--bd will show on the display and it will then be turned
off.
! IMPORTANT: Due to the equipment's complex electronic regulation system, the current con-
nection must be made directly to the vehicle battery point or authorised connection point,
and not to any other point which services other accessories of the vehicle, taking the pre-
caution to not invert polarity when making the connection.
! IMPORTANT: Please consult User's Guide before starting.
Detailed instructions
on power wiring assembly
1
2
+
29
Wiring
supply
EN
®
2
-