dirna Bergstrom bycool green line COMPACT 1.4 Instructions De Montage page 24

COMPACT 1.4
EN
8 Via the front section, position the equipment
with the plate on the hatch of the vehicle. The
hatch plate must remain level with the EPDM
seal.
9
Via the interior section, laterally align the
equipment in the hatch.
! Important: If the seal (A) is not attached
to the base, remove the protective paper
and attach as indicated.
A
10
Attach the ducts in the interior air distribution
panel.
! Important: Any chanelling equipment (B)
included should be discarded as it is not
valid for this unit.
B
9
10
Area to apply
adhesive
24
A
®
8
=
=