Identifying The Parts (A-H01) - Teac A-H01 Mode D'emploi

Identifying the Parts (A-H01)

A B
A POWER
Press this button to turn the unit on and off . The blue indicator lights when the unit is turned on .
B Remote control light sensor
Receives signals from the remote control unit . When operating the remote control unit, point it
at this sensor .
C SOURCE
Each time this button is pressed, the source changes .
D Input indicators
The source being selected lights up .
These indicators will blink when the input signal is not digital audio data or the format of the
audio signal is not compatible with this unit, such as Dolby Digital, dts, or AAC .
E
PHONES
Connect a headphone's 6 . 5 mm stereo plug to this connector .
F VOLUME
Use this knob to adjust the volume . To increase the volume, turn the knob clockwise . To decrease
the volume, turn the knob counterclockwise .
C D E F
9